U-Joint Drive Bellows with Ridge for Volvo Penta AQ200 280 — 875826

GH MARINE / BELLOWS & RELATED PARTS

About this part

U-joint drive bellows with ridge referenced to Volvo Penta 875826 and 876294 (Sierra Marine 18-2744) for compatible Volvo Penta AQ, 200-series, DP, and SP sterndrives. This part is a U-joint drive bellows, not an exhaust bellows; select it by the complete drive model designation and required bellows reference number rather than by engine horsepower alone.

Match the application

Designed for the Volvo Penta sterndrive models listed below using a U-joint drive bellows with ridge. Check the full model suffix—such as 280T, 280PT, DP-A1, or SP-C1—and verify the required OEM bellows reference before ordering.

• Volvo Penta · AQ200, 200, 250, 270, 270T, 275, 275A

  U-joint drive bellows application (with ridge). Match the complete drive designation and required part number.

  Application match

• Volvo Penta · 280, 280DP, 280PT, 280T, PT, 285A

  U-joint drive bellows application (with ridge). Verify the exact suffix on your drive unit.

  Application match

• Volvo Penta · 290, 290A, 290DP, 290 DP unit, 290DPA

  U-joint drive bellows application (with ridge). Match the complete drive designation and required part number.

  Application match

• Volvo Penta · DP-A, DP-A1, DP-A2, DP-B, DP-B1, DP-C, DP-C1, DP-D, DP-D1, DP-E, DP-G, DPX

  U-joint drive bellows application (with ridge). Match the full DP series suffix and required OEM bellows reference.

  Application match

• Volvo Penta · SP-A, SP-A1, SP-A2, SP-C, SP-C1, SP-E

  U-joint drive bellows application (with ridge). Match the full SP series suffix and required OEM bellows reference.

  Application match

• Volvo Penta · DPH

  Requires version-specific confirmation because different bellows versions are used across DPH drive configurations. Verify by matching your exact OEM bellows part number.

  Applies with the stated conditions

Numbers to compare

Technical details

Supplied contents

• U-joint drive bellows

Workshop sequence

General workshop guidance only; use the service procedure for your exact drive or engine configuration.

1. Confirm that the replacement part is the U-joint drive bellows with ridge matching your Volvo Penta drive designation and OEM reference number before disassembly.
2. Clean and inspect the mounting collars and sealing surfaces on the sterndrive and transom side to ensure they are free of corrosion, old sealant, or nicks.
3. Seat the bellows ridge properly into the corresponding groove without twisting or pinching the convolutions, and position the clamps according to the Volvo Penta service manual for your specific drive model.
4. Check bellows alignment and clearance across the full steering and trim range before returning the vessel to service.

About GH Marine

GH Marine focuses on bellows and related marine service parts. Compare the application details, reference numbers and supplied contents together to select the part for your repair.

Delivery information

Estimated delivery: 7–15 calendar days.

Help with your order

For application questions, have your drive or engine identification and required part number ready.

Contact GH Marine / fitment help · Returns policy