3588753 Exhaust Bellows Kit · Fits Volvo Penta DPH / DPR / DPI select, Replaces CEF500538K, 3808536

3588753 Exhaust Bellows Kit · Fits Volvo Penta DPH / DPR / DPI select, Replaces CEF500538K, 3808536

GHMarine exhaust bellows kit for select Volvo Penta DPH / DPR / DPI drives — OEM 3588753. Same-family / catalog refs CEF500538K; legacy 3808536 / 3862168 only when your EPC supersession chain lists them. BOM: 1 × rubber exhaust bellow + 2 × hose clamps when supplied (unnumbered clamps — no invented clamp OEM).

This page is the exhaust bellow on the DPH/DPR/DPI platform. Need the drive-joint bellow on the same platform → GH 25B1096 (3594509 / 3808898 / CEF500537K). Need SX-A / DPS exhaust → GH 25B1094 (3888916). Need SX / DP-S cone-clutch exhaust → GH 17B1010 (3850426).

Which bellow is this?

It is the rubber exhaust bellows kit for later Volvo Penta DPH / DPR / DPI-family drives that specify 3588753. Confirm the old bellow or EPC before you order — drive model letter matters more than horsepower.

It is not drive-joint bellow 3594509 / 3808898 (GH 25B1096), not SX-A / DPS exhaust 3888916 (GH 25B1094), not SX / DP-S exhaust 3850426 (GH 17B1010), not shift bellow 911826, and not steering-cylinder antifouling bellow 21132674.

Signs yours is due

• DPH / DPR / DPI exhaust bellow is cracked, collapsing, or leaking — stamped 3588753 / CEF500538K / 3808536 when readable.
• You are on a DPH-A/B/C/D/D1/E, DPR-A/B/C/D, or DPI-A path and the EPC lists 3588753 for the exhaust bellow position.
• You almost ordered SX-A exhaust 3888916 or SX 3850426 because the bellow "looks similar" — stop and match the OEM number.
• Divert: drive-joint on same platform → GH 25B1096. SX-A/DPS exhaust → GH 25B1094. SX/DP-S 3850426 → GH 17B1010.

Will it fit my drive?

This kit is Compatible with select Volvo Penta DPH / DPR / DPI drives when EPC or the old part confirms 3588753 — including representative rows DPH-A/B/C/D/D1/E, DPR-A/B/C/D, and DPI-A when the official maintenance table / EPC hits. Drive model and OEM number decide fit — not horsepower alone.

*Not for SX-A / DPS (3888916) or SX / DP-S (3850426). Not the drive-joint bellow on the same DPH/DPR/DPI platform.

OEM & swap numbers

Primary OEM 3588753. Catalog family CEF500538K. Legacy 3808536 / 3862168 only on a clear EPC supersession chain. Clamps are unnumbered when supplied — do not invent a clamp OEM such as 853012.

Wrong part? Read before you order

• NOT drive-joint bellow 3594509 / 3808898 / CEF500537K (GH 25B1096)
• NOT SX-A / DPS exhaust 3888916 (GH 25B1094)
• NOT SX / DP-S exhaust 3850426 (GH 17B1010)
• NOT shift bellow 911826
• NOT steering antifouling bellow 21132674
• NOT a kit that invents clamp OEM 853012

What ships in the box

• 1 × Rubber exhaust bellow (3588753 family)
• 2 × Hose clamps when supplied (unnumbered — confirm against package)

Gallery note: product photos may show the rubber bellow only. If your package includes clamps, count two clamps in the carton even when the photo does not show them.

Often ordered with related SKUs

• Same-platform drive-joint bellow → GH 25B1096
• SX-A / DPS exhaust → GH 25B1094
• SX / DP-S exhaust → GH 17B1010

Install tips (DPH/DPR/DPI exhaust)

DPH / DPR / DPI exhaust bellow service. Cold engine; support the boat and drive; disconnect battery; follow the Volvo Penta procedure for exhaust bellow replacement on your exact drive letter. Confirm OEM 3588753 before install — do not substitute 3888916 or 3850426.

1. Confirm old bellow / EPC is 3588753 for DPH/DPR/DPI exhaust — not drive-joint 3594509 and not SX-A 3888916.
2. Support the joint; remove the old bellow and clamps; clean mating flanges.
3. Seat the new bellow fully; install the two clamps on the clamp lands if supplied.
4. Tighten to the service-manual specification for that drive.
5. Run and check for exhaust / water leaks before returning the boat to service.

FAQ

Is this the drive-joint bellow?

No. Drive-joint on the same platform is GH 25B1096 (3594509 / 3808898 / CEF500537K). This page is exhaust 3588753.

Will SX-A / DPS 3888916 fit instead?

No. That is a different exhaust family (GH 25B1094).

Does DPI fit?

Only when EPC / the official table lists 3588753 for DPI-A. Do not assume every DPI unit uses this kit.

What is the clamp part number?

Clamps are unnumbered when supplied. Do not invent OEM 853012 — confirm against your package.

Do photos show the clamps?

Some photos show the rubber bellow only. Count two clamps in the carton when your package includes them.

What comes in the box?

One 3588753-family exhaust bellow and two hose clamps when supplied (confirm against your package).

Please note

Aftermarket replacement by GHMarine. Not affiliated with engine manufacturers named above. "Compatible with", "Replaces", and cross-ref numbers identify the 3588753 DPH/DPR/DPI exhaust bellow family — always confirm drive letter, EPC, and package contents before ordering.