987467 U-Joint Driveshaft Bellows · Fits OMC Cobra clutch-dog select 1986–1993, Replaces 18-2765, 89200, 9-72707

987467 U-Joint Driveshaft Bellows · Fits OMC Cobra clutch-dog select 1986–1993, Replaces 18-2765, 89200, 9-72707

GHMarine U-joint / driveshaft bellows for select OMC Cobra clutch-dog sterndrives — primary OEM 987467. Also seen as 983973 when the catalog uses that legacy number. Cross-refs 18-2765, 89200, 9-72707, 85127P. This page sells one U-joint bellow for the Cobra clutch-dog era — it is not an exhaust bellow, not a shift-cable bellow, and not a full transom multi-part kit.

Need current catalog number 3854127 on a different CSKU path → GH 18B5002. Need Volvo kit parent 22197130 → GH 24BL043. Need exhaust 3850426 / 914036 → GH 17B1010 / 18BK002. Need shift cable 911826 → GH 18B1001.

Which bellow is this?

It is the rubber U-joint / driveshaft bellow that seals the universal-joint area on listed OMC Cobra clutch-dog packages. Confirm the old bellow or EPC shows 987467 (or the matching legacy 983973 on that same Cobra path) before you order.

It is not exhaust bellow 3850426 / 914036, not shift-cable bellow 911826, not AQ drive-joint 876294, not MerCruiser U-joint 816431A1, not adhesive 18-9031-1, and not a gimbal bearing.

Signs yours is due

• OMC Cobra clutch-dog U-joint bellow is cracked, split, or grease-caked — stamped 987467 / 983973 / 18-2765 when readable.
• Water or grease weeps at the U-joint boot while the exhaust and shift-cable bellows still look serviceable.
• You almost ordered exhaust 3850426 or shift 911826 because the chart only said "bellow" — stop and match 987467 on the Cobra clutch-dog U-joint path.
• Divert: current 3854127 CSKU path → GH 18B5002. Exhaust → GH 17B1010. Shift → GH 18B1001.

Will it fit my drive?

This bellow is Compatible with select OMC Cobra clutch-dog sterndrives about 1986–1993 that specify 987467 (or matching legacy 983973 on that same path). Original part number and EPC decide fit. Volvo SX / DP-S / DP-SM is not an open positive fit on this page — do not order from an SX/DP year tag alone. If your EPC shows 3854127 as the current number on a different application, use GH 18B5002 after you confirm that path.

*Conservative dual-table band. Final fit = OEM 987467 (or matching legacy 983973) on the old U-joint bellow / EPC. Not a free pass for Volvo SX / DP-S / DP-SM, and not MerCruiser 816431A1.

OEM & swap numbers

Primary OEM 987467. Legacy / related 983973. Related current catalog number 3854127 appears in interchange charts — confirm EPC before treating it as a drop-in on this CSKU. Cross-refs 18-2765, 89200, 9-72707, 85127P.

Wrong part? Read before you order

• NOT exhaust bellow 3850426 / 914036 (GH 17B1010 / 18BK002)
• NOT shift-cable bellow 911826 (GH 18B1001)
• NOT AQ drive-joint 876294 (GH 17B1016 / 18B3001)
• NOT MerCruiser U-joint 816431A1
• NOT adhesive 18-9031-1 and NOT Quicksilver-style 47-2765 bought on digit coincidence
• NOT a full Bravo / Alpha transom multi-bellow kit

What ships in the box

• 1 × U-joint / driveshaft bellows (987467 family)
• Clamps when supplied — confirm against your package (do not assume clamps until the carton shows them)

Gallery note: placeholder / "No image available" thumbnails are not valid product photos. Upload real single bellow photos before treating this page as image-complete.

Often ordered with related SKUs

• Current 3854127 U-joint path → GH 18B5002
• Volvo kit parent 22197130 → GH 24BL043
• Exhaust cone-clutch 3850426 → GH 17B1010 / 18BK002
• Shift cable 911826 → GH 18B1001

Install tips on the U-joint bellow

U-joint / driveshaft bellow work on the sterndrive. Cold engine; disconnect battery; support the drive per the service manual. This is a U-joint bellow — not a water hose and not a shift-cable boot.

1. Match OEM 987467 (or matching legacy 983973) on the old bellow before removal; photograph clamp / orientation.
2. Remove the drive as required by the service manual to reach the U-joint bellow; clean mating surfaces.
3. Seat the new bellow fully without twist; place clamps on the clamp lands.
4. Use the adhesive / procedure specified for this U-joint bellow in the service manual — do not invent a hose-only clamp method if the manual requires adhesive.
5. Reassemble, then check for water / grease leaks before returning the boat to service.

FAQ

Is 987467 the same as 3854127?

They appear in the same U-joint interchange family, but this page is sold as the 987467 Cobra clutch-dog identity. If your EPC / old bellow shows 3854127 on a different CSKU path, use GH 18B5002 after you confirm that application.

Will this fit my Volvo SX / DP-S from a year tag alone?

No. This page does not open SX / DP-S / DP-SM as an unconditional positive fit. Confirm 987467 on EPC or buy the CSKU that matches your current catalog number.

I saw 47-2765 in a chart — is that this bellow?

Do not buy on "2765" digits alone. 47-2765 is a different family risk on this dual-table. Match 987467 / 18-2765 / 89200.

Is this an exhaust or shift bellow?

No. Exhaust is 3850426 / 914036. Shift cable is 911826. 17B1009 is the U-joint / driveshaft bellow.

Do clamps always ship in the box?

Only when your package includes them. This page locks 1 × bellow; clamp count follows the carton.

Why does Amazon still show a placeholder image?

Placeholder / "No image" thumbs are not product photos. Order / upload decisions should wait for a real single-bellow photo of the 987467 family.

Please note

Aftermarket replacement by GHMarine. Not affiliated with engine manufacturers named above. "Compatible with", "Replaces", and cross-ref numbers identify the 987467 U-joint bellow family for select OMC Cobra clutch-dog applications — always confirm OEM number, drive type, serial/EPC, and package contents before ordering.