U-Joint Bellows for Volvo Penta MD 3.0 GL/GS, SX & DP — 22197130

GH MARINE / BELLOWS & RELATED PARTS

About this part

This is an individual U-joint bellows referenced to Volvo Penta 22197130 and 23075752 for the listed Volvo Penta sterndrive and engine applications. It is a single replacement bellows rather than a complete transom service kit, so check the complete drive designation and required part number before ordering.

Match the application

This U-joint bellows applies to the Volvo Penta marine engines and sterndrive series listed below. Check the complete drive designation—including suffixes such as SX-C1, SX-CT1, SX-RT1, DP-S1, or DPX-S1—rather than selecting by engine displacement or the broad SX or DP series name alone.

• Volvo Penta · MD Series (3.0 GL, 3.0 GS)

  Listed for MD 3.0 GL and 3.0 GS marine applications.

  Application match

• Volvo Penta · HU Series (3.0 GS)

  Listed for HU 3.0 GS marine applications.

  Application match

• Volvo Penta · NC Series (PJX-C, PJX-S, SX-C1, SX-CT1, SX-RT1, DP-S, DP-C1, DP-D1, DPX-S, Xact STEERING, HS1A)

  Covers NC applications with the listed PJX, SX, DP, DPX, Xact STEERING, and HS1A designations.

  Application match

• Volvo Penta · LK Drives (PJX-C, PJX-C1, SX-C1, SX-CT1, SX-RT1, DPS, DP-S1, DP-C1, DP-D1, DPX-S1, Xact STEERING, HS1A)

  Covers LK drive applications with the listed PJX, SX, DPS/DP, DPX, Xact STEERING, and HS1A designations.

  Application match

• Volvo Penta · WT Drives (PJX-C, PJX-S, SX-M, SX-MACLT, SX-MDA, SX-MDB, SX-MHP, SX-MLT, SX-MTD, DP-E, DP-S, DP-S1, DP-S2, DP-SM)

  Covers WT drive applications including PJX-C, PJX-S, SX-M (-MACLT, -MDA, -MDB, -MHP, -MLT, -MTD), DP-E, DP-S (-S1, -S2), and DP-SM.

  Application match

• Volvo Penta · EF Drives

  Listed for EF drive applications.

  Application match

• Volvo Penta · BY Drives

  Listed for BY drive applications.

  Application match

Numbers to compare

Compare your original bellows part number or cross-reference against the numbers below.

Technical details

Supplied contents

• U-joint bellows

Workshop sequence

General workshop guidance only; use the service procedure for your exact drive or engine configuration.

1. Verify the complete Volvo Penta drive designation and compare the old bellows against the replacement part before disassembly.
2. Clean and inspect the mounting collars and sealing surfaces on the gimbal housing and upper drive housing so they are free of corrosion, old sealant, or burrs.
3. Seat the U-joint bellows evenly onto the mounting flanges without twisting or pinching the convolutions.
4. Position and tighten the retaining clamps or rings in the orientation and to the specification given in your Volvo Penta service manual, then check clearance through the full steering and trim range.

About GH Marine

GH Marine focuses on bellows and related marine service parts. Compare the application details, reference numbers and supplied contents together to select the part for your repair.

Delivery information

Estimated delivery: 7–15 calendar days.

Help with your order

For application questions, have your drive or engine identification and required part number ready.

Contact GH Marine / fitment help · Returns policy